Thermal Behaviour and Decomposition Kinetics for Two Palladium(II) Complexes with 1-aminopyrene and its Derivative

The thermal decomposition studies for two palladium(II) complexes Pd(apyr)₂Cl₂ and Pd(pmpa)Cl₂ (apyr=1–aminopyrene and pmpa=N–(2–pyridylmethylene)–1–pyrenylamine) were carried out in pure nitrogen using TG-DTG techniques. The non-isothermal kinetic parameters for the two complexes were evaluated employing the method suggested by Málek, esták, Koga et al. Based on the above results, thermal behaviour of the complexes were carefully discussed, which showed that not only the parameters value, but also the decomposition pattern and mechanism for complex 1 are different from complex 2.This revised version was published online in November 2005 with corrections to the Cover Date.     

The interfacial dilational properties of hydrophobically modified associating polyacrylamide studied by the interfacial tension relaxation method at an oil-water interface

The interfacial dilational viscoelastic properties of hydrophobically associating block copolymer composed of acrylamide (AM) and a low amount of 2-phenoxylethyl acrylate (POEA) (<1.0 mol%) at the octane-water interfaces were studied by means of the interfacial tension relaxation method. The dependencies of interfacial dilational elasticity and viscous component on the dilational frequency were investigated. The interaction of hydrophobically associating block copolymer [P(AM/POEA)] with sodium dodecyl sulfate (SDS) has been explored. The results show that at lower frequency, the dilational elasticity for different concentration copolymer is close to zero; at higher frequency, the dilational elasticity shows no change with increased frequency; At moderate frequency (10(-3)-1 Hz), the dilational elasticity decreased with a decrease in the dilational frequency. The results show that the hydrophobic groups of [P(AM/POEA)] chains can be associated by inter- or intrachain liaisons in water solution. The dilational viscous component for P(AM/POEA) comes forth a different maximum value at different frequencies when the polymer concentration is different. It is generally believed that the dilational viscous component reflects the summation of the various microscopic relaxation processes at and near the interface and different relaxation processes have different characteristic frequencies. The spectrum of dilational viscous component may appear more than once maximum values at different frequencies. The influence of SDS on the limiting dilational elasticity and viscous component for polymer solution was elucidated. For 5000 ppm polymer solution, the limiting dilational elasticity decreased with an increase in SDS concentration. The dilational viscous component passed through a maximum value with a rise in the dilational frequency, which appeared at different frequency when SDS concentration is different; and the higher is the concentration, the lower is the dilational frequency. It can be explained that macromolecules may be substituted by SDS molecules in the interface and the interaction of molecules decrease, which makes the limiting dilational elasticity decrease. For 200 ppm polymer solution, the limiting dilational elasticity increased firstly and then decreased with SDS concentration increasing. This may be explained that the interfacial polymer concentration is so low that SDS molecules absorbed in the interface dominate dilational properties of the interfacial film even at very low SDS concentration. However, SDS molecules can gradually substitute the polymer molecules in the interface with a rise in SDS concentration, which results in the decrease in the limiting dilational elasticity.     

Structure and Magnetic Properties of a Novel Two‐Dimensional Complex from 1, 3, 5‐Benzenetricarboxylate and Neodymium(III) — {[Nd(1, 3, 5‐benzenetricarboxylate)(H2O)4] · H2O}n

A unique neodymium(III) complex, {[Nd(BTC)(H₂O)₄] · H₂O}_n (BTC = 1, 3, 5‐benzenetricarboxylate), was obtained from the reaction between Nd(ClO₄)₃ · xH₂O and Na₃BTC. Coordination bonds, hydrogen bonds, and π‐π stacking form a supramolecular structure with a novel, two‐dimensional framework. The temperature‐dependent magnetic susceptibilities were analyzed by the Curie‐Weiss law; the following values were found C = 1.32, θ = —18.3 K, respectively.     

Thermal Decomposition Kinetics of the Zn(II) Complex with Norfloxacin in Static Air Atmosphere

The thermal decomposition of Zn[NFA]₂5H₂O (NFA=C₁₆H₁₈FN₃O₃, norfloxacin) and its kinetics were studied under non-isothermal conditions in air by TG-DTG and DTA methods. The intermediate and residue for each decomposition were identified from the TG curve. The non-isothermal kinetic data were analyzed by means of the Achar method and the Madhusudanan-Krishnan-Ninan (MKN) method. The possible reaction mechanisms were investigated by comparing the kinetic parameters. The kinetic equation for the second stage can be expressed as d/dt=Aexp(–E/RT)(1–).This revised version was published online in November 2005 with corrections to the Cover Date.     

Amperometric Glucose Biosensor Based on Platinum Nanoparticles Combined Aligned Carbon Nanotubes Electrode

A sensitive amperometric glucose biosensor based on platinum nanoparticles (PtNPs) combined aligned carbon nanotubes (ACNTs) electrode was investigated. PtNPs which can enhance the electrocatalytic activity of the electrode for electrooxidating hydrogen peroxide by enzymatic reaction were electrocrystallized on 4‐aminobenzene monolayer‐grafted ACNTs electrode by potential‐step method. These PtNPs combined ACNTs' (PtNPs/ACNTs) surfaces were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The highly dispersed PtNPs on ACNTs can be obtained. The enzyme electrode exhibits excellent response performance to glucose with linear range from 1×10^?5–7×10^?3 mol L^?1 and fast response time within 5 s. Furthermore, this glucose biosensor also has good reproducibility. It is demonstrated that the PtNPs/ACNTs electrode with high electrocatalytic activity is a suitable basic electrode for preparing enzyme electrodes.     

Electrochemical characteristics of a platinum electrode modified with a matrix of polyvinyl butyral and colloidal Ag containing immobilized horseradish peroxidase

A new hydrogen peroxide biosensor was constructed, which consisted of a platinum electrode modified by a matrix of polyvinyl butyral (PVB) and nanometer-sized Ag colloid containing immobilized horseradish peroxidase (HRP), and using Co(bpy)₃³⁺ as mediator in the hydrogen peroxide solution. The electrochemical characteristics of the biosensor were studied by cyclic voltammetry and chronoamperometry. The modified process was characterized by electrochemical impedance spectroscopy and cyclic voltammetry. The HRP immobilized on colloidal Ag was stable and retained its biological activity. The sensor displays excellent electrocatalytic response to the reduction of H₂O₂. Analytical parameters such as pH and temperature were also studied. Linear calibration for H₂O₂ was obtained in the range of 1×10^–5 to 1×10^–2 M under optimized conditions. The sensor was highly sensitive to H₂O₂, with a detection limit of 2×10^–6 M, and the sensor achieved 95% of steady-state current within 10 s. The sensor exhibited high sensitivity, selectivity and stability.     

三元无规芳—脂族聚酯酰胺的热致液晶行为

采用低湿溶液缩聚的方法合成了对苯二甲酰氯，二甲基联苯胺和己二醇为单体的芳酯族液晶聚酯酰胺。用ＤＳＣ，Ｘ光衍射分析和偏光显微镜等手段研究了该系列聚酯酰胺的热致液晶行为，确认了二甲基联苯胺单体用量在２０％（ｍｏｌ）的情况下，所得聚酯酰胺仍为向列型液晶聚合物。由于聚酯酰胺分子间聚酰胺链段之间的氢键作用，随着二甲基联苯胺用量增加至６０ｍｏｌ％时，所得的聚酯酰胺己无液晶转变温度，其液晶区间即从熔融温度直至分     

A study of methylation of inorganic tin by iodomethane in an aquatic environment with 13C carbon isotope tracer technique

The methylation of tin(II) [Sn(II)] by iodomethane (CH₃I) under environmental conditions has been further demonstrated by a ¹³C carbon isotope tracer method. Methylation products are mainly monomethyltin, and very small amounts of dimethyltin. The reaction of Sn(II) and CH₃I was investigated at pH 2, 4, 6, 8, 10 and salinity (S) 8, 15, 22, 28, 35%; it has been found the reaction was affected by pH and salinity, the tin methylation activity being highest at about pH 6 and S = 28% . The methylation reaction is first-order for both CH₃I and Sn(II), and the rate equation has been obtained as follows: .     

Photoactivation of pheophorbide a induces a mitochondrial-mediated apoptosis in Jurkat leukaemia cells

The mechanism of cell death by pheophorbide a (Pba) which has been established to be a potential photosensitizer was examined in experimental photodynamic therapy (PDT) on Jurkat cells, a human lymphoid tumor cell line. In 30-60 min after irradiation, Pba treated cells exhibited apoptotic features including membrane blebbing and DNA fragmentation. Pba/PDT caused a rapid release of cytochrome c from mitochondria into the cytosol. Sequentially, activation of caspase-3 and the cleavage of poly ADP-ribose polymerase (PARP) were followed. Meanwhile, no evidence of activation of caspase-8 was indicated in the cells. In experiments with caspase inhibitors, it was found that caspase-3 alone was sufficient initiator for the Pba-induced apoptosis of the cells. Pba specific emission spectra were confirmed in the mitochondrial fraction and the light irradiation caused a rapid change in its membrane potential. Thus, mitochondria were entailed as the crucial targets for Pba as well as a responsible component for the cytochrome c release to initiate apoptotic pathways. Taken together, it was concluded that the mode of Jurkat cell death by Pba/PDT is an apoptosis, which is initiated by mitochondrial cytochrome c release and caspase-3-pathways.     

Knoevenagel condensation catalysed by poly（vinyl chloride） supported tetraethylenepentamine （PVC-TEPA）

Poly(vinyl chloride) supported tetraethylenepentamine (PVC-TEPA) has been found to be an efficient catalyst for the Knoevenagel condensation. A wide range of aromatic aldehydes easily undergo condensations with ethyl cyanoacetate and malononitrile in the commercial 95% ethanol in refluxing using PVC-TEPA as catalyst to afford the desired products of good purity in moderate to excellent yields. A recycling study confirmed that the catalyst could be reused, the yield of the desired condensation product were not reduced. The merits of this protocol are environmentally benign, simple operation, convenient work-up and good yields. Furthermore, the catalyst can easily be recovered and reused at five times with comparable yields.